Powder Metallurgy Materials including Atomized iron powders, Reduced sponge iron powders, Diffusion-alloyed powders, Pre-alloyed powders, Press ready mixed powders and Additives. Atomized iron powders are mainly used in medium density structural parts and high density structural parts with high compressibility and higher apparent density compared to the reduced sponge iron powders. Reduced sponge iron powders are widely used in powder metallurgy industry and welding industry etc. the green and edge strength of the compacts are very high due to the spongy structure of the powder particles. Diffusion-alloyed powders are based on the atomized iron powders and reduced sponge iron powders have been diffusion bonded with certain content Mo, Ni, Cu. This type of materials make it possible to produce the parts with good performance after heat treatment. Pre-alloyed powders are water atomized steel powders with 0.85%Mo and 1.5%Mo often used as-sintered with additions of copper or nickel to make it possible for good surface hardening etc. Press ready mixed powders are based on the atomized iron powders, reduced sponge iron powders and alloyed powders, bonded with other additives by binder.
MOQ:1KG Prices:1.5$ Batch return sample Buy more than 5 tons in bulk, and get more discounts. Prices:0.7~1.5$ In the promotion in September Advantages of atomized iron powder. 1. High purity 2. High compressibility 3. High strength and high formability
Lube JT-340 is a modified wax base lubricant, which retains the advantages of wax, such as easy dewaxing and spot free. Lube JT-340 is a product with excellent comprehensive performance. Due to its excellent lubrication performance, the surface of pressed parts is bright, which improves the......
Lube JT-420 is a lubricant with excellent comprehensive performance. It can provide excellent powder performance for powder mix with only 0.6% addition. Due to its high apparent density and good flowability, it has excellent filling performance and low filling height. Therefore, it has good......
Molybdenum disulfide (MoS2) is a lubricant available in three grades—Technical, Technical Fine, and Super Fine. MoS2 content is available from 98% to 99%,typical MoS2 content (calculated average) is 98.5%.
Ferro phosphorus is a Symbiosis compounds with a phosphorus content range of 18-26% and silicon content range of 0.1-6%, it is obtained from electric furnace for phosphorus making,smelted in the blast furnace by phosphate ore and iron ore. As an alloy agent,it can also produce phosphate in steel making, it can improve the corrosion resistance and machinability.
Graphite is widely used for alloying element of powder metallurgy industry, high quality graphite can avoid some problems of sintering parts, such as pores caused by agglomeration, rust spots on surface, poor function of mixing powder, abnormal metallurgical structure, especially affects the mechanical property. The purity of the graphite powder, particle size distribution, residual acid and alkali, and ash powder are very important for the final sintering parts.
Mns Manganese Sulfide Powder For Mold Release / Metallurgy
With the development of high strength powder metallurgy iron-based materials, the requirement for cutting performance of materials is increasing. Manganese sulfide is a good additive for iron-based materials with carbon content less than 0.8%. As an important magnetic semiconductor, nano-MnS has potential application value in short-wavelength optoelectronic devices.
LAP100.29H is a type of ultra-pure water atomised iron powder, with AD 2.95-3.10g/cm3, with good compression performance, and is widely used in high strength, high density sintered structural PM parts....
LAP100.29 is a kind of ultra-pure water atomized iron powder. With apparent density 2.95-3.10g/cm3, good compressive performance, wide range of application, and it is widely used in the production of high strength and high density sintered structural parts....
