 |
LAP100.29H is a type of ultra-pure water atomised iron powder, with AD 2.95-3.10g/cm3, with good compression performance, and is widely used in high strength, high density sintered structural PM parts.
Advantages：
·High purity, easy compression, good fluidity, used for the production of high density PM structural parts.
·Fixed-volume batch mixing, maintaining the stability of different batches of powder.
·Irregular particle shape, compactibility.
·High purity, used as the iron magnetic material base.
Specification
Chemical Properties（%） | Unit | Specification | |
| Min | Max | ||
| C | % | 0.01 | |
| Si | % | 0.04 | |
| Mn | % | 0.12 | |
| P | % | 0.012 | |
| S | % | 0.012 | |
| H2-Loss | % | 0.12 | |
| Physical Properties | |||
| Apparent density | g/cm3 | 2.95 | 3.10 |
| Flow rate | s/50g | 28 | |
| Green density 600Mpa | g/cm3 | 7.20 | |
| Particle size distribution（%） | |||
| 180-212um | % | 1 | |
| 150-180um | % | 10 | |
| 45-150um | % | ||
| -45um | % | 15 | 30 |
Properties
Under sintering temperature of 1120℃, sintering hardness (HRB)90; Tensile strength(MPa) 485; Elongation(%)1.75; Impact powder(J)18.5; Sintering expansion rate 0.25%.
Product Packing
25kg/bag, 1000kg/bag, the package can be customized by buyer's requirements.
Application
This type of metal powder can be used for the material of powder metallurgy sinter component parts.
LAP100.29H is widely used for the production of sintered metal parts with density above 6.8g/cm3 and PM forged parts.
LAP100.29H is a type of ultra-pure water atomised iron powder, with AD 2.95-3.10g/cm3, with good compression performance, and is widely used in high strength, high density sintered structural PM parts.
Advantages：
·High purity, easy compression, good fluidity, used for the production of high density PM structural parts.
·Fixed-volume batch mixing, maintaining the stability of different batches of powder.
·Irregular particle shape, compactibility.
·High purity, used as the iron magnetic material base.
Specification
Chemical Properties（%） | Unit | Specification | |
| Min | Max | ||
| C | % | 0.01 | |
| Si | % | 0.04 | |
| Mn | % | 0.12 | |
| P | % | 0.012 | |
| S | % | 0.012 | |
| H2-Loss | % | 0.12 | |
| Physical Properties | |||
| Apparent density | g/cm3 | 2.95 | 3.10 |
| Flow rate | s/50g | 28 | |
| Green density 600Mpa | g/cm3 | 7.20 | |
| Particle size distribution（%） | |||
| 180-212um | % | 1 | |
| 150-180um | % | 10 | |
| 45-150um | % | ||
| -45um | % | 15 | 30 |
Properties
Under sintering temperature of 1120℃, sintering hardness (HRB)90; Tensile strength(MPa) 485; Elongation(%)1.75; Impact powder(J)18.5; Sintering expansion rate 0.25%.
Product Packing
25kg/bag, 1000kg/bag, the package can be customized by buyer's requirements.
Application
This type of metal powder can be used for the material of powder metallurgy sinter component parts.
LAP100.29H is widely used for the production of sintered metal parts with density above 6.8g/cm3 and PM forged parts.
