 |
The alloy powder made by vacuum atomization has the advantages of complete spherical powder, good fluidity, even distribution of alloy elements, low oxygen content good corrosion resistance, heat resistance, wear resistance, etc. it is suitable for 3D printing, spray welding, laser cladding and other process materials
Characteristics
High Sphericity & High Flowability.
Specifications
| Alloy | Cr | Ni | Mo | V | Si | Mn | Nb | C | Fe |
| 316L | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | ≤1.0 | ≤2.0 | ≤0.03 | Bal | ||
| 304L | 18.0-20.0 | 8.0-12.0 | <1.0 | ≤2.0 | ≤0.03 | Bal | |||
| 17-4PH | 15.5-17.5 | 3.0-5.0 | Cu:3.0-5.0 | ≤1.0 | ≤1.0 | 0.15-0.45 | ≤0.03 | Bal | |
| 420J1 | 12.0-14.0 | ≤0.6 | ≤1.0 | ≤1.0 | 0.15-0.25 | Bal | |||
| 430 | 16.0-18.0 | ≤0.75 | ≤1.0 | ≤0.12 | Bal | ||||
| H13 | 4.75-5.5 | 1 1-1.5 | 0.8-1.2 | 0.8-1.2 | 0.2-0.5 | 0.32-0.45 | Bal | ||
| M2 | 3.75-4.5 | 4.5-5.5 | 1.75-2.2 | 0.2-0.45 | 0.15-0.4 | W.5.5-6.75 | 0.78-0.88 | Bal | |
| 310S | 24.0-26.0 | 19.0-22.0 | <1.5 | .≤2.0 | 0.2-0.45 | Bal | |||
| S136 | 12.0-14.0 | 0.15-0.4 | 0 8-1.0 | ≤1.0 | 0.2-0.45 | Bal | |||
| CoCrMo | 26.5-30.0 | ≤1.0 | 4.5-7.0 | ≤1.0 | ≤1.0 | Co:Bal | ≤0.35 | ≤1.0 |
Application
The alloy powder made by vacuum atomization has the advantages of complete spherical powder, good fluidity, even distribution of alloy elements, low oxygen content good corrosion resistance, heat resistance, wear resistance, etc. it is suitable for 3D printing, spray welding, laser cladding and other process materials
Characteristics
High Sphericity & High Flowability.
Specifications
| Alloy | Cr | Ni | Mo | V | Si | Mn | Nb | C | Fe |
| 316L | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | ≤1.0 | ≤2.0 | ≤0.03 | Bal | ||
| 304L | 18.0-20.0 | 8.0-12.0 | <1.0 | ≤2.0 | ≤0.03 | Bal | |||
| 17-4PH | 15.5-17.5 | 3.0-5.0 | Cu:3.0-5.0 | ≤1.0 | ≤1.0 | 0.15-0.45 | ≤0.03 | Bal | |
| 420J1 | 12.0-14.0 | ≤0.6 | ≤1.0 | ≤1.0 | 0.15-0.25 | Bal | |||
| 430 | 16.0-18.0 | ≤0.75 | ≤1.0 | ≤0.12 | Bal | ||||
| H13 | 4.75-5.5 | 1 1-1.5 | 0.8-1.2 | 0.8-1.2 | 0.2-0.5 | 0.32-0.45 | Bal | ||
| M2 | 3.75-4.5 | 4.5-5.5 | 1.75-2.2 | 0.2-0.45 | 0.15-0.4 | W.5.5-6.75 | 0.78-0.88 | Bal | |
| 310S | 24.0-26.0 | 19.0-22.0 | <1.5 | .≤2.0 | 0.2-0.45 | Bal | |||
| S136 | 12.0-14.0 | 0.15-0.4 | 0 8-1.0 | ≤1.0 | 0.2-0.45 | Bal | |||
| CoCrMo | 26.5-30.0 | ≤1.0 | 4.5-7.0 | ≤1.0 | ≤1.0 | Co:Bal | ≤0.35 | ≤1.0 |
Application
