Products Categories

Pre Alloyed Powder

  • Diffusion Alloy Powder
    LAP100.29D1 Add Ni(1.70-2.10%)and Cu(1.60-1.90%)in to the base powder(LAP100.29Mo1)mix uniformly. It enables the powder has high compressibility, stable dimensional change rate and good sintering performance. It is suitable for production of high strength materials. ·The powder has high......
  • Phosphorus Alloyed Powders
    LAP100.29P1 is atomised based phosphorus alloyed powders Which contains 0.45%- 0.65% phosphorous based on LAP100.29, which gives the powder very high compressibility....
  • Mo Alloy Powder
    LAP100.29M01: Add Mo (0.50-0.70%)into the molten steel,which enables all alloy elements fully integrated into the molten steel.The powder has high compressibility and high hardenability.This type of power is mainly used for production of good heat treatment performance parts. ·Good heat......
  • Free Cutting Iron Powder
    LAP100.29S1 and LAP100.29S2 are prealloyed powder which contains Mn and S added by melting to make MnS clamps precipitated during solidification. MnS will play the role of lubricants when machining . The parts made of the prealloyed powder will increase tool life and save much production cost......
  • Ni-Mo Alloy Powder
    LAP100.29A1: Add Ni(1.70-2.00%)and Mo(0.40-0.60%)into the molten steel,which enables all alloy elements fully integrated into the molten steel The powder has high strength and good heat treatment performance This type of power is mainly used for production of forging parts and high strength......
Contact us
Copyright © 2022 LWPM Co., LTD.